Shop products are only available for commercial customers and purposes!
Bladders for t-packers 45°
from: 437,98€
Bladders for nozzle packers with 45° branching
Available for main pipes in sizes from DN75 to DN150 with 45° branch from DN50 to DN150.
These are stable bubbles made of a silicon-coated gauze.
By exchanging the bladder, it can be adapted to the pipe dimensions to be rehabilitated. The bladder is fixed to the existing holder for Fluvi nozzle packers by pipe clamps and fabric tape and is immediately ready for use.
By inserting the lubricant gel (green) on the inside of the bladder, the T-Liner can be easily pulled on. To make it easier to pull the bladder out of the installed T-Liner, release agent (blue) is applied to the outside of the bladder.
If the bladder is damaged, small holes can be repaired with bicycle patches (bicycle shop) and silicone glue (DIY store).
Also available with 90° branch.
ITEM.NO. | DESCRIPTION |
2340001 | DN 75/50 – 45° |
2340002 | DN 75/75 – 45° |
2340003 | DN 100/50 – 45° |
2340004 | DN 100/75 – 45° |
2340005 | DN 100/100 – 45° |
2340006 | DN 125/100 – 45° |
2340007 | DN 125/125 – 45° |
2340008 | DN 150/75 – 45° |
2340009 | DN 150/100 – 45° |
2340010 | DN 150/125 – 45° |
2340011 | DN 150/150 – 45° |
Additional information
nominal size | 100/100, 100/50, 100/75, 125/100, 125/125, 150/100, 150/125, 150/150, 150/75, 75/50, 75/75 |
---|
Newsletter Registration
Subscribe to our newsletter today and receive a one-time voucher of 10 Euro!